{"product_id":"feynlab-window-polish-250-ml","title":"Feynlab Window Polish - 250 ml","description":"\u003cp\u003eA specialized abrasive glass polish that removes what regular cleaners leave behind. It clears hard water etching, calcium buildup, wiper haze, and mineral staining to restore factory-clear visibility, by hand or by machine. A three-part system of cerium oxide, ceramic microspheres, and a non-fluorinated acidifier softens, cuts, and nano-etches the glass into a hydrophilic state ready for coating.\u003c\/p\u003e\n\u003cp\u003eRemoves what regular glass cleaners leave behind, creating pristine clarity for both everyday drivers and professional detailers. Easy application with consistent results.\u003c\/p\u003e\n\u003cp\u003eAchieving flawless, optically clear glass remains one of the most demanding tasks in professional detailing. Automotive glass surfaces endure constant exposure to hard water spots, mineral etching, acid rain deposits, wiper blade residue, and environmental contamination that regular glass cleaners simply cannot remove. When standard cleaning products fail to restore clarity, FEYNLAB Window Polish delivers the correction power needed to bring glass back to factory-fresh condition.\u003c\/p\u003e\n\u003cp\u003eFEYNLAB Window Polish is a specialized abrasive formula engineered to eliminate stubborn water spot etching, calcium buildup, wiper haze, and surface contamination from all automotive glass surfaces. The advanced polishing agents work quickly to cut through mineral deposits and restore optical clarity without scratching or distorting the glass. This professional-grade glass polish can be applied by hand for light contamination or paired with a machine polisher and foam or felt pad for severe water spot removal and heavy restoration work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow the Cleaner Polish Works\u003c\/strong\u003e\u003cbr\u003eThe cleaner polish is not a general-purpose glass cleaner. It contains three distinct active components, each performing a specific role in the preparation process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCerium Oxide\u003c\/strong\u003e\u003cbr\u003eCerium oxide undergoes a chemical reaction with the glass surface rather than simply removing material from it. It softens the top fifteen nanometers of the glass, generating an active reaction layer on the surface. That layer is deep enough to encompass the majority of surface defects. This soft surface that is created is the first step in the cutting phase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic Microspheres\u003c\/strong\u003e\u003cbr\u003eOnce the surface begins to soften, our Ceramic microspheres perform the cutting stage. They rate at approximately 7 on the Mohs hardness scale. Glass sits between 5.5 and 6.5. That difference in hardness allows the microspheres to cut through and lift away the softened surface layer. Clearing the glass down to a micro-abraded surface and revealing hydroxyls where the coating will anchor. This hardness also means the cleaner polish must never contact painted surfaces, rubber, or trim. Mask all surrounding areas before polishing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProprietary Acidifiers\u003c\/strong\u003e\u003cbr\u003eThe third component is a non-fluorinated acidifier developed as a replacement for traditional fluoride-based glass preparations. This assists the cutting action by chemically nano etching the surface, priming the glass for the strongest possible coating adhesion.\u003c\/p\u003e\n\u003cp\u003eThe active cerium oxide reaction that occurs during polishing remains on the surface afterward and is a direct contributor to coating adhesion. Wiping the glass with IPA, panel prep, or any solvent-based product after polishing will degrade or remove that reaction layer and compromise the bond. The cleaner polish is the final step before the coating. The only thing to follow this step will be water, during the readiness test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Readiness Test\u003c\/strong\u003e\u003cbr\u003ePrepared glass will allow water to sheet out completely flat. Any beading indicates that contamination or residual product is still present. If that occurs, complete an additional polish pass before testing again. The glass must be fully hydrophilic before completed, and especially if a coating will be applied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoves grime, water spots, and mineral buildup\u003c\/li\u003e\n\u003cli\u003ePrepares glass for coating adhesion\u003c\/li\u003e\n\u003cli\u003eRestores crystal-clear visibility\u003c\/li\u003e\n\u003cli\u003eConverts glass to a hydrophilic state for better bonding\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Feynlab","offers":[{"title":"Default Title","offer_id":52645631557930,"sku":"FYN-WINDOWPOLISH-250","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/2623\/9018\/files\/Window-cleaner-polish-250-v4_1000x1000px-1-1_png.webp?v=1790115837","url":"https:\/\/detailing.com\/products\/feynlab-window-polish-250-ml","provider":"Detailing.com","version":"1.0","type":"link"}