What is it? - Combination 2-in-1 product – it is a compound/polish. Cuts like a compound and finishes like a polish.
3D ONE uses 3D's proprietary alpha ceramic alumina abrasive technology. Alumina Oxide is a conductor of heat. Ceramic is an insulator of heat. By combining to create a hybrid, the ceramic counters the heat issue created from the alumina oxide to reduce and help eliminate heat issues like burn-through from excess surface temperatures.
No filler formula – The results you see are true and accurate – no fillers, hiding or masking.
What does it do? - Removes below surface paint defects like swirls, scratches, water spots and oxidation. Can be used with aggressive pads and powerful tools for removing deep and/or serious paint defects or can be used with soft foam pads and free spinning orbital polishers to finish out for show car results.
When do you use it? - Anytime you want to remove below surface defects that are in your car’s paint and then create a super high gloss finish perfect for sealing with a wax, synthetic paint sealant or a ceramic paint coatings.
3D ONE works on all paint types, hard, medium, and soft. And you can control the level of cut or finish by simply changing the type of pad or the type of pad together with the type of tool. With 3D ONE, you can get rid of all your other antiquated compounds and polishes because now there is finally a product that will in fact do it all.
Besides offering incredible cutting and finishing ability, the product never dries up on you. Meaning you can buff until the cows come home and the product works throughout the entire buffing cycle and just as important – ZERO DUSTING! So many compounds and product dry-up and then start creating dust all over the car, your pad and you! No so with 3D ONE.
No fillers. 3D ONE does not contain any fillers, or any ingredients intended to fill, mask, or camouflage swirls and scratches. The results you see are true and accurate.
Also – Super easy wipe off. Most compounds become sticky and can become difficult to wipe-off after buffing. 3D ONE is easy to wipe-off immediately after buffing and for hours after buffing. Easy wipe-off mans less risk for user-induced towel wiping marring and better yet – less tiring for you.
- Combination hybrid compound/polish – Can cut like an aggressive compound or finish-out like a fine-cut polish – in a single product.
- Uses engineered ceramic alumina abrasives, which reduce surface temperature.
- Forever buffing cycle – stays active and wet on the surface as long as you buff.
- ZERO dusting. Note the word ZERO is in all CAPITAL LETTERS!
- Easy wipe-off and no hurry – wipe off immediately or after buffing out entire car.
- Versatile cut – for more correction use a cutting pad, for better finishing, use a finishing pad.
- No fillers – the results you see are true and accurate.
- Body shop safe – contains no silicones or any ingredient that can contaminate a fresh paint environment.
- Water-based for easy clean-up
- Green technology is Earth friendly – V.O.C. compliant, and biodegradable.
