Dr. Beasley’s MATTE DECON is a chemical decontaminant formulated to remove embedded contaminants like iron particles and industrial fallout from matte and satin finish vehicles. Because matte and satin finishes cannot be clayed without harming the surface, this is the perfect alternative to use for decontamination.

• Safe To Use On Matte Paint
  Clay grates on matte finishes, disfiguring their appearance. Matte Decon works without clay to keep matte paint looking as it should.
• Pulls Out Deeply Embedded Iron
  Matte Decon breaks down and pulls out any iron particles it comes in contact with, whether it’s brake dust from the road or rail dust from trains.
• Eliminates Industrial Fallout
  Cars in urban areas are riddled with iron and other particles due to nearby industrial activity. With Matte Decon, you can get them all out and start fresh.
• Helps Prevent Paint Oxidation
  Iron particles embedded in the finish rust (oxidate) over time, eating through it until holes appear. Matte Decon stops this by removing iron before it oxidates.
• Preps For Nanocoating
  When applying nanocoatings like Matte Paint Coating Pro, deep contamination must be removed or it will be locked in. Use Matte Decon to get it all out first.
• Fast-Acting
  Matte Decon rapidly removes contamination to keep the detail going at a steady pace. With the time you’re saving, you’ll be polishing in no time.

How Does It Work?
When sprayed on a matte-finished panel, Matte Decon penetrates deep to pull iron and other contamination to the surface so it can be easily removed.

DIRECTIONS

1. Wash and dry vehicle.
2. Spray Matte Decon onto a panel or small area.
3. Using a clean microfiber towel, wipe in long linear strokes to ensure total coverage over the area or panel.
4. Let product dwell for 2-3 minutes. Do not let dry.
5. Using a new microfiber towel, carefully wipe away with a gentle buffing motion until product is removed. Do not apply excessive pressure.
6. Repeat process panel by panel until vehicle is decontaminated.
7. Rinse and dry vehicle thoroughly to ensure all product has been removed.

Dr. Beasley's Suggests

Multiple applications and longer dwell time may be necessary.
Compatible with glass and headlights.
Do not apply in direct sunlight.
Always test in an inconspicuous area first to check for surface compatibility.